As is well known, SBS modified asphalt waterproofing membrane is a commonly used waterproofing material. So, what are the specifications and models of SBS modified asphalt waterproofing membrane? I believe this is a question that many people are very concerned about. So, let me talk about this issue, hoping that everyone can gain some understanding from it.

According to their physical and mechanical properties, they are divided into Type I and Type II.

According to the tire base, it can be divided into polyester tire (PY), fiberglass tire (G), and fiberglass reinforced polyester tire (PYG)

According to the surface isolation materials, they are divided into: polyethylene film (PE), fine sand (S), and mineral particles (M)

According to the bottom surface isolation material, it is divided into: fine sand (S) (note: fine sand diameter not greater than 0.6mm), polyethylene film (PE)

Divided by thickness: Polyester tire roll (3, 4, 5mm) Fiberglass tire roll (3, 4mm) Fiberglass reinforced polyester tire roll (5mm)

You can also refer to the following table:

Today, the editor will share these. If you want to learn more about waterproofing membranes, please follow the editor's next sharing.